Lista de senhas padrão de fábrica de DVR e NVR (2022)

Este artigo listará o nome de usuário e as senhas padrão de uma série de sistemas de segurança . Essas credenciais de login são aquelas que os gravadores/câmeras saem da linha de fabricação.

Se você ou alguém com acesso ao seu sistema alterou algum valor padrão, as credenciais padrão não serão mais aplicadas, a menos que o equipamento em questão seja "reiniciado".

Lista de senhas padrão de DVR e NVR

Nome da marca	Nome de usuário	Senha	Endereço IP padrão
3xLogic	administrador	12345	192.0.0.64
Atividade	administrador	administrador	192.168.0.100
American Dynamics	administrador	administrador	192.168.1.168
Arecont Vision	administrador	Sem senha definida	Sem padrão / DHCP
Avigilon	administrador	administrador	Sem padrão / DHCP
Eixo	raiz	sem senha definida	Sem padrão / DHCP
Basler	administrador	administrador	192.168.100.x
Bosch	serviço	serviço	192.168.0.1
Bosch Dinion	administrador	Sem senha definida	192.168.0.1
Brickcom	administrador	administrador	192.168.1.1
CBC Ganz	administrador	administrador	192.168.100.x
Cisco	nenhum padrão	sem senha definida	192.168.0.100
CNB	raiz	administrador	192.168.123.100
Costar	raiz	raiz	desconhecido
Dahua	administrador	administrador	192.168.1.108
Dr.	administrador	1234	192.168.0.200
DVtel	Administrador	1234	192.168.0.250
DynaColor	administrador	1234	192.168.0.250
Namorar	administrador	paquerador	192.168.250.116
Foscam	administrador	deixe em branco	desconhecido
GeoVision	administrador	administrador	192.168.0.10
Grandstream	administrador	administrador	192.168.1.168
GVI	Administrador	1234	192.168.0.250
HIKVision	administrador	12345	192.0.0.64
Honeywell	administrador	1234	no default/DHCP
IOImage	administrador	administrador	192.168.123.10
IPX-DDK	raiz	Admin or admin	192.168.1.168
IQInvision	raiz	sistema	no default/DHCP
JVC	administrador	Model# of camera	no default/DHCP
VideoIQ	Supervisor	Supervisor	no default/DHCP
LTS Security	administrador	12345	192.0.0.64
March Networks	administrador	leave blank	desconhecido
Merit Lilin	Câmera	admin pass	No Default / DHCP
Merit Lilin	Gravador	admin / 1111	No Default / DHCP
Messoa	administrador	Model# of camera	192.168.1.30
Mobotix	administrador	meinsm	No Default / DHCP
Northern	administrador	12345	192.168.1.64
Panasonic	administrador	12345	192.168.0.253
Panasonic	admin1	senha	192.168.0.253
Pelco	administrador	administrador	no default/DHCP
PiXORD	administrador	administrador	192.168.0.200
PiXORD	raiz	passar	192.168.0.200
QVIS	administrador	1234	192.168.0.250
Samsung	raiz	4321 / admin	192.168.0.200
Samsung	administrador	4321 / 1111111	192.168.1.200
Sanyo	administrador	administrador	192.168.0.2
Sentry360	Administrador	1234	192.168.0.250
Sony	administrador	administrador	192.168.0.100
Speco	raiz	raiz	192.168.1.7
Speco	administrador	administrador	192.168.1.7
StarDot	administrador	administrador	no default/DHCP
Starvedia	administrador	no set password	no default/DHCP
Toshiba	raiz	ikwb	192.168.0.30
Trendnet	administrador	administrador	192.168.10.1
UDP	raiz	desconhecido	desconhecido
Ubiquiti	ubnt	ubnt	192.168.1.20
W-Box	administrador	wbox / 123	192.0.0.64
Wodsee	raiz	leave blank	desconhecido
Verint	administrador	administrador	no default/DHCP
Vivotek	raiz	no set password	no default/DHCP

Most Popular CCTV Brands

Acti default username/password

• Username:Admin/admin
• Password:12345/123456
• IP address:192. 168.0.100

Arecont Vision default username/password

Arecont does not have a default password, but you can reset it to factory settings. Siga esses passos:

1. Access the camera’s web interface by typing the IP in your web browser.
2. Under the Administration or System tab, click on Restore to Factory Default.
3. Once the camera reboots, all settings on the camera will be restored to factory default.

AXIS default username/password

For an old system:

• Username:Root
• Password:Pass
• IP address:192.168.0.90

The new generation AXIS cameras have a resetting sequence:

1. Remove the Ethernet cable.
2. Press and hold the control button and insert the Ethernet cable again while holding the control button.
3. Hold the control button until the amber lights turn on.
4. Then release the button.
5. Wait for about 1 minute.
6. When the amber lights turn into the green lights your camera is reset and your password as well.

BOSCH default username/password

For old models:

• Username:service
• Password:service
• IP address:192.168.0.1

For new models:
You can reset the camera by pushing the reset button for about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk).

DAHUA default username/password

• Username:admin
• Password:admin
• IP address:192.168.1.108

Local Account:

• Username:888888
• Password:888888

GEOVISION default username/password

• Username:admin
• Password:admin
• IP Address:192.168.1.108

HIKVISION default username/password

For old models (before firmware 5.3.0):

• Username:admin
• Password:12345
• IP Address:192.0.0.64

For new models, you can reset passwords via the SADP tool. Please click the link below and follow the instructions.

LTS Security default username/password

• Username:admin
• Password:12345 or 123456
• IP Address:192.0.0.64

LTS equipment is Hikvision re-branded.

Messoa default username/password

• Username:admin
• Password:1234 or model number of camera or
• IP address:192.168.1.30

Mobotix default username/password

• Username:admin
• Password:meinsm

SAMSUNG Techwin default username/password

For old models:

• Username:admin
• Password:111111 or 1111111

For new models:

• Username:admin
• Password:4321
• IP Address:192.168.1.200

SONY default username/password

• Username:admin
• Password:admin
• IP Address:192.168.0.100

Speco default username/password

For old models:

• Username:root or admin
• Password:root or admin

For new models:

• Username:admin
• Password:1234
• IP Address:192.168.1.7

Ubiquiti default username/password

• Username:ubnt
• Password:ubnt
• IP Address:192.168.1.20

Vivotek default username/password

Nenhum. You can choose your own password after setup. If you want to reset it.

1. Press and hold down the reset button for at least 1 minute.
2. Power on the camera until the red light flashes rapidly.

Now your camera is back to factory default without any password.

• O que é a codificação Channel-Zero (às vezes chamada de Zero-Channel) em CCTV?
• A diferença entre NVR e DVR